Moxie is synonymous with courage and you will understand the name when you hear it play. No matter what kind of music; the full and articulate bass, open midrange and clear highs will open up your music and the Moxie will make it all seem effortless.
Easy to place
With the bass reflex port in the front the Moxie can be placed close to the rear wall or in a corner, thus taking up little precious floor space. And the discrete terminals, the beautiful curved back and the timeless look of the stainless steel base make the Moxie a little gem that may be admired from all angles.
Danish loudspeakers
Danish designed loudspeakers with the latest technology ensure the Moxie delivers on its promises: symmetric magnetic motor, solid aluminium basket, extensive venting, to name a few
Controlled directivity
By integrating the cabinet design, cross over and drivers, the Moxie has a controlled directivity of sound, meaning the Moxie is less critical to the listening room acoustics
Hand build in Denmark
Build by hand in the for Denmark typical small scale production adds a personal touch to each loudspeaker.
Select your veneer
Vist the Factory >> and be there during the build. You will be able to select the veneer you like best
Finely tuned cross over
the elaborate 24 dB/oct Linkwitz - Riley cross over gives more upper mid range energy for a more open sound and improves the tweeter high power performance.
Clean upper bass
The acoustic design of the cabinet effectively reduces internal standing waves around 200Hz for improved clarity
Danish Design
Carefully considered curves are the heart of each unique Davone design. The perfect rhythm and balance of the design visualize music.
Black fine weave polyester, other colours on request
Side
Quarter cut Ash, black
Side
Quarter cut Ash, Oyster White RAL 1013
Stand
Polished stainless steel
Frequency response
45-22.000Hz
Impedance
4 ohm, 3.4 ohm minimum at 240Hz
Sensitivity
88 dB/2,83V/m
Recommended Amplifer power
50-100 Watt
Mid woofer
150mm, low distortion driver with a special fibre blend cone with optimal balance of stiffness, damping and density. Symmetric motor structure for optimal drive force symmetry. Designed in Denmark
Tweeter
1", Anodised aluminium dome, flow optimized vented pole piece with non-reflective chamber, saturation controlled motor system. Designed in Denmark
Cross over
2.4kHz, 24dB/Oct Linkwitz Riley
System
Bass reflex port in front
Cabinet Construction
The back panel is made from 7 layer beech wood form pressed veneer for increased stiffness and a unique appearance from all viewing angels. The form pressed baffle is made from 10 layers HDF